Skip to content

Best Nails for Vinyl Siding in 2024 | Top 5 Model Reviewed

Nails for Vinyl Siding is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to and may earn from qualifying purchases.

Most people don’t realize it, but when installing Vinyl Siding, it is important to use high-quality wood nails to prevent tearing or damaging your vinyl siding. Low-quality nails can’t deliver a good performance, no matter how good the material is.

It might also cause water to come inside your home. If you are planning to install vinyl siding on your home exterior, you will need to determine the best nails for vinyl siding. Or you will suffer in the long run.

Therefore, we have chosen high-quality nails so that you will not have to worry about your vinyl siding panel looking bad or having any problems. They are designed to penetrate the surface smoothly and will help you avoid any splitting or other damage.

Hard-to-Find Aluminum Nails For Vinyl Siding

Eagle 1 Stainless Steel Vinyl Siding Nails

Top 5 Best Nails For Vinyl Siding

There are many different types of nails, but they are not all the same. Some nails are better than others, and some are just plain terrible. You have to be careful when choosing your nails.

The following reviews will help provide information about five different types of nails for vinyl siding so that you can make an informed decision before purchase!

1. Hard-to-Find Aluminum Nails for Vinyl Siding

Are you looking for a quality nail to install vinyl siding? Look no further than these 11 gauge nails! The diameter is perfect for the job, and they’re easy to use.

Two inches of nails will be long enough to penetrate the vinyl in place. This is a pack of 145 nails, so you’ll have plenty to use. All of these nails are high-quality, which will ensure that your siding stays up for a long time.

You can easily drive them in with a hammer or mallet since they have a flat nail head. They have a smooth shank that allows them to slide through the vinyl without causing any damage, and they’re also painted, so they’ll match the color of your siding.

If you’re looking for nails that are a bit harder to find, Hard-to-Find Aluminum Nails For Vinyl Siding are a great option.

Highlighted Features:

  • Comes with 11 gauge nails
  • 2 inches of nails hold the vinyl in place
  • Comes with 145 nails in a pack
  • Made of aluminum that ensures the siding stays up for a long time
  • Flat head for easy to drive in with a hammer or mallet
  • Nails are painted

2. Eagle 1 Stainless Steel Vinyl Siding Nails

If you are looking for nails for a vinyl siding installation project, these nails are perfect. With stainless steel material, these nails are extremely durable and weather-resistant.

These nails come in a beautiful cream color that will match your vinyl siding panels perfectly. The size of these nails is 1-1/4, so they will be long enough to penetrate your new or existing siding panels in place securely for many years!

You can use these nails for aluminum trim, fascia covers, and metal siding. They provide many color options, including white, cream, wicker, clay, bronze, black, green, rosewood, browns, pearl, grey, tuxedo grey, etc.

Eagle 1 Stainless Steel Vinyl Siding Nails are an excellent choice for fast installation. The smooth shank prevents snagging or damaging the material. A textured head design reduces the need for pre-drilling.

If you buy a 1 pound box, you will receive a free pair of Nitrile coated gloves and 1/32″ pilot drill bit.

Highlighted Features:

  • 304 stainless steel nails
  • Cream color that perfectly matches vinyl sidings
  • 1-1/4 size for a stronger hold
  • Smooth shanks prevent snagging and damage
  • A textured head reduces pre-drilling
  • Free pair of Nitrile coated gloves and 1/32″ pilot drill bit

3. Maze Vinyl Siding Nails

Maze nails are a great choice for vinyl siding and make it look perfect. The double-dipped large head makes it perfect for securing the vinyl to the substrate.

The 2-inch length is just right for most applications. Maze Vinyl Siding nails are easy to use and made in the USA. Due to their double hot zinc coating, nails are corrosion resistant and will last for years.

Plus, their high-quality construction means they can withstand even the most extreme weather conditions. These nails are a great choice for anyone looking for a tough and reliable siding nail.

These nails have been proven to provide the performance you can count on, making them ideal for any vinyl siding project. So if you’re looking for a dependable and long-lasting solution for your siding, these vinyl siding nails are a perfect choice.

Highlighted Features:

  • The 2-inch length is just right for most applications
  • Easy to use and made in the USA
  • Zinc finish ensures corrosion resistance
  • Reliable and long lasting

4. Primesource Building Nails for Siding Vinyl

When it comes to home improvement projects, NAIL SDNG ALM is such a great choice for your project. Primesource Building Nails are also great for tough jobs. They are stronger, more rigid, and can grip the material.

The Grip-Rite aluminum vinyl siding nails are an excellent choice for the installation of vinyl. Since they have an oversized head, they will stay in place when nailing vinyl siding.

Primesource offers a great selection of 4D building nails, perfect for use with vinyl siding. These nails have a head diameter of 3/8 inches, ensuring a stronghold.

They have an aluminum finish and have a diameter of 12 ga, making them sturdy and durable. With a length of 1-1/2 inches, they are the perfect size for most applications.

Ring Type Shank on these Primesource Building Nails For Siding Vinyl means that they are easy to install and remove. Additionally, the round head makes driving them a lot easier.

And finally, the Diamond Point Type ensures that the nail will not split the wood when you’re driving it in. You get 577 nails which means plenty to get the job done.

Highlighted Features:

  • Stronger, more rigid, and grips the material.
  • Have a diameter of 3/8 inches and a length of 1-1/2 inches
  • Have an aluminum finish and is 12 ga in diameter
  • Ring type shank for easy installation and removal
  • Round type head makes driving much easier
  • Diamond point type prevents splitting of wood

5. Aluminum Vinyl Siding Nails

Are you looking for a reliable way to fasten your vinyl siding? Look no further than Clendenin Brothers Aluminum Siding Nails.

The nails are made of high-quality 5056 aluminum, and they come in a box that contains 1 pound of nails. You can use these nails to install vinyl or aluminum siding.

While they are strong and durable, they are light enough to be easy to use. Aluminum Vinyl Siding Nails offer strength and staining resistance, making them a good choice for projects where that’s a concern.

With the large head and round shank, wood siding penetration is easier. Additionally, it helps to ensure that the nail is inserted smoothly, preventing any further splitting.

You can use them in corrosive environments. They will also attach cedar and redwood siding and trim.

Highlighted Features:

  • Durable and reliable construction
  • Made of high-quality 5056 aluminum
  • Perfect for installing vinyl or aluminum siding
  • Staining resistance, making them a good choice
  • Large nail head and round shank reduce the force

This is the complete list of the top nails for vinyl siding available on the market today. You can pick one that meets your needs and requirements.

Factors to Consider When Buying Nails for Vinyl Siding

start fastening vertical siding

Finding the right nail for your vinyl siding project can be tricky. Depending on what you’re looking for, there are a number of factors to consider before making a purchase. The type of nail you select will affect how long it lasts and whether or not it will corrode.

Additionally, the nail head size matters as well as where in your house you plan to install them. This is just a quick overview of some important things that need to be considered when buying nails for installing vinyl siding panels.


There are different types of nails: aluminum and galvanized or stainless steel. Aluminum nails are a good choice because they won’t corrode, even in the most severe environments. Additionally, they are lightweight and easy to use.

If you’re looking for nails for vertical or horizontal siding panels that are strong enough to withstand rough weather, galvanized steel nails might be a better choice.

Head Size:

They come with different nail heads. The size you need will depend on the project you are working on and what type of siding you are using. For horizontal or vertical siding panels, the nails should be sized to fit into the tongues.

Size & Length:

vinyl soffit

You need to consider size and length when buying nails for a siding panel. Nails are available in different sizes. The length is important as well because you need to make sure the nails don’t go too far into the wood or protrude on the other side. The last thing you want is for them to show above your siding.

Type of Shank:

There are three types of shanks to consider when you’re looking for the nails for vinyl siding: ring shank, smooth shank, round shank. A ring shank is a great choice because it is easy to install and remove. Additionally, it is less likely to split the wood. A smooth shank is best for when you want to drive the nails in quickly and easily. Finally, round shank nails also prevent the splitting of the wood.


Nails are available in a variety of colors, including cream, natural, black, brown etc. If you’re looking for a nail that will blend in with your horizontal or vertical siding, you might want to consider a cream nail. If you’re looking for something that will pop, choose a black or brown nail.


When you buy nails for horizontal or vertical siding, you need to consider what your budget is and how much they cost. It’s a good idea to calculate the price per nail if possible before buying. This will give you an estimate of how much each nail costs and help you figure out which product offers the best value for your money.


What Nails to Use for Vinyl Siding?

Crooked Nails

When you’re looking for the nails for vinyl siding, it’s important to consider aluminum, galvanized steel, or other corrosion resistant nails. Aluminum nails are a good choice because they are corrosion-resistant and lightweight. They are perfect for installing vinyl siding. Galvanized steel nails are a better choice for rough weather.

Can You Hammer Nails into Vinyl Siding?

Yes, you can hammer nails into vinyl siding, depending on the type of siding you have. Different types of siding require different types of nails. If your siding is wood-like or thin metal, you can use a hammer easily, but it will be a little bit difficult for thick wood. As an alternative, you can use a siding nailer that supports the nails.

Can I Use Electro Galvanized Nails for Vinyl Siding?

You can use electro galvanized steel roofing type nails for vinyl siding. The nails should have a diameter of 1/8″ and a head of 3/8″. Without the coating, the nails will rust quickly.

Can you Use Vinyl Siding Nails for Shingles?

No, vinyl siding nails and shingles require different types of nails. Shingles require a special type of nail known as “roofing nails” with a sharp point. With galvanized roofing nails, you can easily puncture the shingles and secure them to the roof. You can also use a roofing nailer or nail gun to drive nails into shingles.

Should Vinyl Siding be Nailed Tight?

To drive nails, they shouldn’t be too tight or loose. If they are too tight, it will be difficult to remove them without causing damage to the vinyl. If they are too loose, the wind will be able to lift them up and away from the house.


When it comes to vinyl siding, the options are endless. From colors and textures to styles, you can find just about anything for your home’s exterior. But you have to use the best nails for vinyl siding to ensure a job well done.

We hope this article has helped you with your selection process and given you a better understanding of selecting nails for vinyl siding projects.

Leave a Reply

Your email address will not be published. Required fields are marked *