How to Remove Polymeric Sand from Pavers

How to Remove Polymeric Sand from Pavers

Poly sand is a type of sand that is made from polymer plastics. Poly sand can be used in landscaping, industrial applications, and other uses. Poly sand is typically made by blending two types of plastic: low density polyethylene and high density polyethylene. Poly sand can also be used to make plastic pavers and other objects.

Polymerization refers to the process of combining two or more compounds which at one stage act as individual components to make a new compound. Polymeric sand, also known as polymer sand and polymer play sand (or plastic playground sand) is a type of synthetic granular material that was invented in 1999 in Techniseal. What makes this particular type of sand special is the fact that it has an extremely high level of compressive strength and durability unlike other types of sands.

What are the Causes of Poly Sand Haze?

What are the Causes of Poly Sand Haze

Polymeric sand is a material that has been used for decades in the construction of commercial driveways. There are a number of reasons for poly sand haze occurrence. When this special type of gravel becomes wet, it binds to other particles, including those left behind on walkway pavers and creates what we know as polymeric haze or fog. The white color you see floating above your pavement can be removed with pressure washing equipment but if not dealt with quickly over time will become more intense than ever before!

Another trigger for poly sand haze is photochemical activity. When certain substances in the atmosphere react with sunlight, it causes poly sand haze. This reaction is commonly called an “oxidation” process.

Poly sand haze can be viewed from very far distances and may even appear as a white sheet over different areas of the air. In some places, poly sand haze is also called a “dust veil”. This phenomenon occurs when the sun gets obscured by the suspended particles in the atmosphere.

Step-By-Step Guide to Remove Polymeric Sand from Pavers

  • Step 1: Sweep up any polymers that are on the top of your pavers.
  • Step 2: Brush off any accumulated sand, salts, and other debris before it gets stuck in your pavers.
  • Step 3: Mix one gallon of dishwashing liquid with two gallons of water. Use a spray bottle to carefully mist the paver surface where you see dirt or sand deposits.
  • Step 4: Scrub stubborn polymer stains with an old toothbrush or similar utensil to break them up (you’ll be able to see where these stains are).
  • Step 5: Rinse off the solution down your sinks and drains to prevent buildup from occurring.
  • Step 6) Wipe down your pavers with just water to remove any remaining dirt or paver joint sand. It’s important to do this in the direction that water would flow so that polymeric sand does not get pushed into cracks between paver joints and become trapped there.
  • Step 7: If stains remain, follow the same process with some white vinegar instead of dishwashing liquid. Rinse away and wipe down with plain water again.
  • Step 8) Make sure your pavers are completely dry before walking on them again!

Special Note: The best way to remove polymeric sand haze from pavers is to use a pressure washer or garden hose, and then re-coat the paved surface. We recommend using a 50/50 solution of water and soap to remove the haze rather than harsher chemicals. The process will make your pavers shiny and new again.

What Are Polymeric Sand Advantages?

  • Polymeric sand is a type of soil made from sand and a special polymer. It has many different advantages, properties and uses that make it one of the best types of soil for many different purposes.
  • Durable materials: If you have a child who likes playing with sand but ends up damaging your regular pavers, then this kind of sand would be great because it is made from durable materials like concrete.
  • Prevent dust and debris from damaging: Another benefit in using polymeric sand for your pavers is that these materials will help prevent dust and debris from spoiling other surfaces around the house such as carpets or garage floors.
  • Usable in a porch area: A home cleaning service professional can recommend you to use other kinds of materials if they think that the porch area.

Where is polymeric sand used based on the application?

This property basically means that polymeric materials are not only good for paver patio base purposes but can also be used indoors even though they will have some slight differences compared to regular sand. Some areas that polymeric sand can be used are:

  • In a play area, such as a sandbox
  • Around plants and shrubs in your garden or landscape
  • To fill low spots so they are level with surrounding ground
  • As a base under paving stones or pavers for pathways or driveways
  • To create levees and prevent silt from building up along river banks and streams
  • In animal enclosures, such as birdbaths or koi ponds

Guide to Use Polymeric Sands

This guide below will help you when using polymer sand.

Use high quality sand

The quality of the sand you use is very important to prevent it from cracking. High quality sand lasts longer and does not crack. The other factors that should be considered when choosing this kind of material are the color, texture and whether or not you want the foamed version.

Read Full instructions before using polymeric sand

It’s important to install polymeric sand correctly and in order to do so, read the manufacturer’s instructions carefully.

Apply polymeric sand in sunny weather

Apply Polymeric Sand in sunny weather that means to avoid applying it on rainy days. Polymeric joint sand can only be applied in sunny weather because moisture is not good for its application.

Use a broom

A broom can be used to fill in the gaps between pavers or tiles where small amounts of material, such as dirt, paver sand, gravel and rocks have been spilled. It is also useful for leveling surfaces such as when installing tile flooring. Sweep the broom back and forth across the space to scoop up loose materials from around the gap. If there are any large pieces that will not go into the gap, use your fingers to remove them first. Sweep each side of the gap until all debris has been captured. Sweep the area again to level the floor. Use paved sealer after the concrete has been cured, usually in the second or third season.

Guide to Remove Polymeric Sand from Pavers

Conclusion:

Removing polymer sand from pavers is not hard at all. We need to use the right material and follow proper instructions for finishing this task quickly.

Relevant Reading:

Leave a Reply

Your email address will not be published. Required fields are marked *